Hi guys,
I was able to get a handle on my mixture control issue. It is the original control. I found a few notches in the control cable where it exits the sheath. Looks like vibration wear. I really liked the way it would go one notch at a time so I will replace it with a ratcheting control as suggested.
thanks again!
New member
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.