Spinner

[Joe Moilanen]

Sorry, forgot to look for bulkheads... will do it tomorrow.

Joe
4518C

[Joe Moilanen]

I located the front and rear bulkheads and would be willing to part with both of them for $175.00 plus shipping. Let me know...

Joe Moilanen
4518C

[simatos]

Joe thanks The bulkheads are for the 6 bolt type correct?? I would be interested in buying then from you. I have just gotten hold of fiberglass type spinner looks stock I am going to measure the diameter hopefully it would work with your bulkheads I will get bac to you shortly G

[Joe Moilanen]

Yes, they're for a 6 bolt crank. I've got a 0300D also. I had a cracked spinner a while back and bought a used one that came with bulkheads. My bulkheads were still good so I ended up with extras. My spinner is fiberglass also. My rear bulkhead is about 9 5/8" with 6 holes around the outside and the front one about 8 3/4" with 6 holes around the outside for the spinner also. If you decide that you want them, I'll mail them to you and you can verify fit before you send any money.

Joe Moilanen
4518C

[simatos]

Joe Sorry for delay getting back to you, it sounds like you do have the goodies. the dementions for the bulkheads seem to measure correctly with my spinner. If you are ok sending them up pending a fit check that would be great, otherwise am happy to send you the $$ or a deposit which ever you prefer. I think my info is in the members book/address etc. An interesting off topic I called spruce for prop bolts AN8-44 will fit and I expected these would be lots of money but they told me under $2.00 which sound to me too inexpensive to be the correct bolts / What do ya think?? Hope to hear from you soon G

[Joe Moilanen]

I'll just mail them and you can check them for fit. If you can't trust a 170 driver you can't trust anyone!

Joe

[simatos]

Joe that will eb great. I willlook forward to their arrival. I will cover all you costs ThanksG