Stock instrument panel lights

A place to relax and discuss flying topics.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
User avatar
Bruce Fenstermacher
Posts: 10422
Joined: Tue Apr 23, 2002 11:24 am

Stock instrument panel lights

Post by Bruce Fenstermacher »

I just removed the floating instrument panel, cleaned and repainted it and reinstalled it all with new shock dampers. I also took the time to run a ground wire to each of the stock instrument light sockets. Installed my Sharpie red GE1816 bulbs and I should be good to go for a night flight.

Problem is my airplane is now based at a daytime only grass field. Doesn't lend itself much to night flights to see how well these stock lights work. I didn't have stock lights in my last 170 so I'm wondering if the tips of 5 bulbs sticking through the panel really will light up the instruments.

Anyone else using the stock system? Are your bulbs transparent red, opaque red or clear?
CAUTION - My forum posts may be worth what you paid for them!

Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
mike roe
Posts: 352
Joined: Mon Nov 07, 2005 10:53 am

Re: Stock instrument panel lights

Post by mike roe »

Bruce
When I removed my floating panel on my 52 it was painted white on the inside.Dont know if it was factory,but makes sense.
Mike
User avatar
Bruce Fenstermacher
Posts: 10422
Joined: Tue Apr 23, 2002 11:24 am

Re: Stock instrument panel lights

Post by Bruce Fenstermacher »

Thanks Mike. I repainted the sub panel itself as well as the inside of the panel overlay a metallic silver. Figured it may not help but''t couldn't hurt.

I would have left the sub panel natural aluminum which one should to consider if they don't wire a ground to each socket otherwise the sockets probably won't get a good ground. I only painted it because it was actually severally corroded from a few years of an improperly installed leaky windshield years in the past.
CAUTION - My forum posts may be worth what you paid for them!

Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
User avatar
GAHorn
Posts: 21294
Joined: Fri Apr 12, 2002 8:45 pm

Re: Stock instrument panel lights

Post by GAHorn »

Back when my eyes were much younger, the pipeline patrol 140's had that same lighting system and it was adequate. I made many return flights home late at night. (Of course, we didn't have Sharpies back then, so I cannot predict the results of that high-tech mod.) :lol:
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons. ;)
User avatar
KS170A
Posts: 239
Joined: Thu May 26, 2005 4:31 pm

Re: Stock instrument panel lights

Post by KS170A »

Bruce,
I did the same thing to my stock lights some years ago (running a ground wire). The lighting was "adequate," but my main dissatisfier then became glare on the windscreen at night from light that would escape between the floating panel and the overlay. I've cut out a new floating panel, sans socket lighting, and plan to go with either Nu-lites or Fiberlites.
--Josh
1950 170A
User avatar
blueldr
Posts: 4442
Joined: Thu May 02, 2002 3:16 am

Re: Stock instrument panel lights

Post by blueldr »

Install a glare shield and it will stop the instrument light windshield glare too.
BL
bsdunek
Posts: 425
Joined: Wed Feb 11, 2004 6:42 pm

Re: Stock instrument panel lights

Post by bsdunek »

IMHO, the stock lighting system is OK for the instruments, but it doesn't light the rest of the panel. I have an overhead light that illuminates the whole panel, and that with the stock instrument lights is much better.
Bruce
1950 170A N5559C
Post Reply
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.