delete
Posted: Fri Mar 23, 2012 8:47 pm
delete
The International Cessna® 170 Association
Formed to preserve and promote a truly classic airplane
https://www.forum.cessna170.org/forums/
delete
Page 8 of 13
delete
Posted: Fri Mar 23, 2012 10:23 pm
delete
delete
Posted: Sun Mar 25, 2012 11:55 pm
delete
Re: New Machine
Posted: Mon Mar 26, 2012 2:38 am
Cool. What style did you go with? A close up would be nice. What is the cost?
delete
Posted: Mon Mar 26, 2012 6:06 am
delete
Re: New Machine
Posted: Mon Mar 26, 2012 6:31 pm
Velcro is great to use here
Re: New Machine
Posted: Mon Mar 26, 2012 9:54 pm
I used velcro when I put in my airtex carpet. I sewed the velcro to the carpet to keep it from just pulling the foam off the backing.
Other than the tunnel, the carpet stays in place by itself anyway.
Other than the tunnel, the carpet stays in place by itself anyway.
delete
Posted: Fri Mar 30, 2012 12:35 am
delete
delete
Posted: Fri Mar 30, 2012 1:58 am
delete
Re: New Machine
Posted: Fri Mar 30, 2012 8:25 am
I hope you realize that in order to keep all that pretty paint in good shape on the floor and rudder pedals etc...you're gonna have to fly barefoot! 
(Congratulations! Lookin' pretty!)
(Congratulations! Lookin' pretty!)
Re: New Machine
Posted: Sat Mar 31, 2012 3:13 pm
most all the rides I give are clothing optional
Re: New Machine
Posted: Sun Apr 01, 2012 2:33 am
May I suggest NOT inviting George!!!!!
Scott.....53B
Scott.....53B
Re: New Machine
Posted: Sun Apr 01, 2012 4:57 am
DANG! And I'd just gotten all my optional clothing back from the cleaners!
delete
Posted: Sun Apr 01, 2012 9:53 pm
delete
Re: New Machine
Posted: Mon Apr 02, 2012 12:37 am
I Don't know about legality, but to save some weight discard the metal spring setup and use polyfiber for foam supports. Just wrap and glue around the seat frame top and bottom, then heat shrink snug. No need to put any coating on it as it will be where the sun don't shine, so to speak. Light, easy and very strong. Pretty comfortable too.