The International Cessna^® 170 Association

Posted: **Wed Feb 05, 2014 11:33 pm**

We are doing a re-furbish on our new to us airplane. Does anybody have a good idea or picture of a yoke mounted PPT switch? Unfortunately, our new nav/com is mounted under the yoke push/pull knob, and a curly cord may interfere with the view of the radio. Any ideas are welcome!

Frank Hale & Greg Eller, N3006A, Cessna 170B

Posted: **Mon Feb 10, 2014 8:25 pm**

Great advice: Don't drill your original yoke!

Posted: **Tue Feb 11, 2014 12:19 am**

If it's a refurbish, can you move the radio? I used a Velcro mounted PTT. Not elegant, but works. I agree with gahorn, don't drill the yoke.

The International Cessna^® 170 Association

Ideas for a yoke mounted Push to Talk

Ideas for a yoke mounted Push to Talk

Re: Ideas for a yoke mounted Push to Talk

Re: Ideas for a yoke mounted Push to Talk

The International Cessna® 170 Association

Ideas for a yoke mounted Push to Talk

Ideas for a yoke mounted Push to Talk

Re: Ideas for a yoke mounted Push to Talk

Re: Ideas for a yoke mounted Push to Talk

The International Cessna^® 170 Association