Page 1 of 1
170A Fuel Primer O-Ring part number
Posted: Fri Jul 24, 2015 8:18 pm
by BlakeinAlabama
Can anyone confirm the part number I would need to get at Spruce for my fuel primer? Are there 2 O-rings in it? Thanks
Re: 170A Fuel Primer O-Ring part number
Posted: Fri Jul 24, 2015 10:06 pm
by 170C
If you have a Harbor Freight store nearby purchase an assortment of "O" rings and there will be the correct size in that assortment. I put one (2) on mine 3+ yrs ago and it still works just fine--no leaks, etc.
Re: 170A Fuel Primer O-Ring part number
Posted: Fri Jul 24, 2015 10:12 pm
by n2582d
You might want to check out
this thread.
Re: 170A Fuel Primer O-Ring part number
Posted: Fri Jul 24, 2015 10:52 pm
by BlakeinAlabama
I noticed there is a nut on the front of the primer pump handle. I am taking it that you screw that off to remove the handle/plunger?
Re: 170A Fuel Primer O-Ring part number
Posted: Sat Jul 25, 2015 5:10 pm
by 170C
Yes.