The International Cessna^® 170 Association

Hi everyone!!
Does anyone know the PN of the 2 bolts used to connect the control wheel to the control tube? I’ve 2 rivets now but they start to be a bit loose and i have that bad feeling with my roll control.

Thank you, grazie!!

Rivets (PN 0413216 and 0413216-1) are original. They are ridiculously priced. Either tighten them up if possible…or substitute machine screws, MS27039C with a nylon stop nut, IMO.

SUPER!! Thank you very much man, super appreciated

I have used Hanson Rivet as a supplier of the semi- tubular rivets used in the control wheels of Cessnas. They also carry the mandrel to properly upset the tail of the rivet.