Page 1 of 1

changing N #

Posted: Fri May 09, 2008 7:19 pm
by iowa
i'd like to change the N # on my L4
i have a # reserved
(the one it originally had)
how do i do this?
thanks
dave

Re: changing N #

Posted: Fri May 09, 2008 7:42 pm
by hilltop170
Tell the FAA Registration Branch in OK City you want to assign your reserved number and pay a small fee.

Where have you been? Haven't heard from you in a long time.

Re: changing N #

Posted: Fri May 09, 2008 7:44 pm
by N2865C
Is this what you are looking for???

http://www.faa.gov/licenses_certificate ... _nnumbers/

Re: changing N #

Posted: Fri May 09, 2008 7:50 pm
by iowa
thanks guys
that is exactly what i was looking for.
i've been remodeling the bathroom for my wife.
you know....1st things 1st!!!
dave 8O :D
dave
Image

Re: changing N #

Posted: Sat May 10, 2008 1:47 pm
by Green Bean
No green board sheet rock, in the tub area??

Re: changing N #

Posted: Sat May 10, 2008 4:58 pm
by c170b53
Stay away from those MOA's , there's just too much going on in there.

Re: changing N #

Posted: Sun May 11, 2008 8:42 am
by GAHorn
Green Bean wrote:No green board sheet rock, in the tub area??
I put green-board up along the walls of our master bath when we remodeled, in anticipation of the tile-layer's work. They cut it all down and installed ordinary white. That was ten years ago and I have no clear recollection of why they did so, but I do recall asking them about it and they convinced me of whatever reason they had. (I think it had something to do with compatibility with the thin-set they were using.) They didn't charge me for that portion of their work.

Re: changing N #

Posted: Sun May 11, 2008 11:55 am
by iowa
actually...
i have used green sheet rock.
i simply used a picture of when it was 1st remodeled 25 years ago!! 8O
you caught me!!
dave

Re: changing N #

Posted: Tue Jun 10, 2008 10:28 pm
by flyguy
Iowa I don't mean to hi-jack the thread but this also mentions N #

http://edocket.access.gpo.gov/2008/E8-3822.htm

I tried to post this in the "Member Issues" yesterday and it seems like there is some restrictions for "members" to post in the "Member Issues" thread so here it is. Seems like the FAA is looking to ram this in and I'll bet if they get, it it won't be without them trying to tack on a "USER" fee.
Image

Re: changing N #

Posted: Wed Jun 11, 2008 11:33 am
by n3833v
If you go to AOPA and find the link to the FAA site for registration, you will find many comments for this about how inefficient the registrations are now according to people that do the actual registrations. We also were able to post comments and I don't know if that is still open.

John