170A Fuel Primer O-Ring part number

A place to relax and discuss flying topics.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
BlakeinAlabama
Posts: 59
Joined: Mon May 30, 2011 12:20 am

170A Fuel Primer O-Ring part number

Post by BlakeinAlabama »

Can anyone confirm the part number I would need to get at Spruce for my fuel primer? Are there 2 O-rings in it? Thanks
Blake Mathis
Huntsville, AL
BlakeMathis@yahoo.com
Top
User avatar
170C
Posts: 3182
Joined: Tue May 06, 2003 11:59 am

Re: 170A Fuel Primer O-Ring part number

Post by 170C »

If you have a Harbor Freight store nearby purchase an assortment of "O" rings and there will be the correct size in that assortment. I put one (2) on mine 3+ yrs ago and it still works just fine--no leaks, etc.
OLE POKEY
170C
Director:
2012-2018
Top
User avatar
n2582d
Posts: 3008
Joined: Mon Apr 29, 2002 4:58 am

Re: 170A Fuel Primer O-Ring part number

Post by n2582d »

You might want to check out this thread.
Gary
Top
BlakeinAlabama
Posts: 59
Joined: Mon May 30, 2011 12:20 am

Re: 170A Fuel Primer O-Ring part number

Post by BlakeinAlabama »

I noticed there is a nut on the front of the primer pump handle. I am taking it that you screw that off to remove the handle/plunger?
Blake Mathis
Huntsville, AL
BlakeMathis@yahoo.com
Top
User avatar
170C
Posts: 3182
Joined: Tue May 06, 2003 11:59 am

Re: 170A Fuel Primer O-Ring part number

Post by 170C »

Yes.
OLE POKEY
170C
Director:
2012-2018
Top
Post Reply

Return to “The Pilot Lounge”

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.