Good Repair Shop

A place to relax and discuss flying topics.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
melcessna
Posts: 90
Joined: Thu May 17, 2007 12:28 am

Good Repair Shop

Post by melcessna »

In need of a Good repair shop in the Midwest for sheet metal work on control surfaces with paint capability. Suggestions? Thanks so much.
Michael E. Lewis
Top
User avatar
Andy Metzka
Posts: 20
Joined: Tue Jan 01, 2013 3:44 am

Re: Good Repair Shop

Post by Andy Metzka »

Try Nick Keith 309 992 8760 based at C15 Pekin Il. He does good work and/or may be able to recommend someone closer.
Top
User avatar
blueldr
Posts: 4442
Joined: Thu May 02, 2002 3:16 am

Re: Good Repair Shop

Post by blueldr »

A friend of mine has had good results on re-skinning and repair on control surfaces from a young fellow down in Alabama who regularly advertises in the Cessna section of TAP..
BL
Top
melcessna
Posts: 90
Joined: Thu May 17, 2007 12:28 am

Re: Good Repair Shop

Post by melcessna »

Thanks to both
Michael E. Lewis
Top
User avatar
ddr36d
Posts: 25
Joined: Tue Oct 18, 2005 1:36 am

Re: Good Repair Shop

Post by ddr36d »

Airframe Components by Williams, Inc. 9838 N 1100 E, Kendallville, IN 46755
Phone 260-347-0807
Don
Top
Post Reply

Return to “The Pilot Lounge”

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.