Manifold pressure gauge wanted!

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
russfarris
Posts: 476
Joined: Wed May 15, 2002 2:25 am

Manifold pressure gauge wanted!

Post by russfarris »

OK, George Horn...I'm convinced I need a MP gauge to fill the last hole in my panel! Does anyone have an original Cessna 2 1/4 manifold pressure gauge they would like to part with??? Russ Farris
Top
User avatar
N1478D
Posts: 1045
Joined: Mon Apr 22, 2002 5:32 pm

Post by N1478D »

Russ, I've sent you a PM on a gauge - let me know if the message with the link didn't work and I'll resend it.
Joe
51 C170A
Grand Prairie, TX
Top
User avatar
GAHorn
Posts: 21279
Joined: Fri Apr 12, 2002 8:45 pm

Post by GAHorn »

A convincing substitute is PN 10-11250, $84.00, from Aircraft Spruce. View it online at http://www.aircraftspruce.com
877/477-7823
It's the one I installed and like it very much, and it looks correct.
Top
Post Reply

Return to “The Hangar”

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.