Instrument panels
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
Avee8or
- Posts: 51
- Joined: Sun Jan 18, 2015 1:13 pm
Instrument panels
I am updating the instruments in my 53 B...does anyone have a cad file for the floating panel, and suggestions for someone to machine one? I am in Ocala FL. Many thanks!
Varel Freeman
170B N3211A
195 N195GW
PA31 N508Y
170B N3211A
195 N195GW
PA31 N508Y
-
falco
- Posts: 217
- Joined: Tue May 25, 2010 5:44 pm
Re: Instrument panels
I sent a panel file for a quote to Sendcutsend.com - they do waterjet and laser cutting among other things. Price, shipped, for a 170 sized panel (different project) with the instrument holes, hardware holes, etc cut out of .125 2024 aluminum was under $100.
I have no prior experience with this company.
I ordered some parts for brake pedals - .031 steel parts waterjet cut - I ordered 6 pcs early last week and they show up later today.
Ordering was easy. I'll report back on quality.
$36 shipped.
I have no prior experience with this company.
I ordered some parts for brake pedals - .031 steel parts waterjet cut - I ordered 6 pcs early last week and they show up later today.
Ordering was easy. I'll report back on quality.
$36 shipped.
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.