Ground turn radius

A place to relax and discuss flying topics.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
User avatar
a320Scott
Posts: 5
Joined: Fri Aug 04, 2023 11:02 pm

Ground turn radius

Post by a320Scott »

1955 170B ground turning radius.
Does the tail turn inside of the wing radius?
In other words, if in taxiing between a row of hangers and my wingtips are clear, what kind of clearance do I need to do a 180 degree swing?
User avatar
GAHorn
Posts: 21260
Joined: Fri Apr 12, 2002 8:45 pm

Re: Ground turn radius

Post by GAHorn »

Well…. the wingspan is 37-feet…and the length of the fuselage is 25-feet. So the distance from the left main to the tailwheel is shorter than from the left main and the right wingtip… Depending upon whether you pivot to the Left…or the Right…. you might strike the Right Wingtip to the Left…and the Left Wingtip to the Right. :cry:

….and….Beware! Striking that wingtip in such a manner subjects the REAR WING ATTACH point to SEVERE FORCES which can get expensive. GroundLoops can do this also.
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons. ;)
Post Reply
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.