Hi everyone!!
Does anyone know the PN of the 2 bolts used to connect the control wheel to the control tube? I’ve 2 rivets now but they start to be a bit loose and i have that bad feeling with my roll control.
Thank you, grazie!!
Control wheel to control tube bolts
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
GAHorn
- Posts: 21295
- Joined: Fri Apr 12, 2002 8:45 pm
Re: Control wheel to control tube bolts
Rivets (PN 0413216 and 0413216-1) are original. They are ridiculously priced. Either tighten them up if possible…or substitute machine screws, MS27039C with a nylon stop nut, IMO.
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
-
Gmonti91
- Posts: 5
- Joined: Tue Apr 15, 2025 11:17 am
Re: Control wheel to control tube bolts
SUPER!! Thank you very much man, super appreciated
-
cessnut
- Posts: 113
- Joined: Thu Apr 08, 2021 12:36 am
Re: Control wheel to control tube bolts
I have used Hanson Rivet as a supplier of the semi- tubular rivets used in the control wheels of Cessnas. They also carry the mandrel to properly upset the tail of the rivet.
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.