Pietenpol Weight & Balance

A place to relax and discuss flying topics.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
User avatar
Kyle
Posts: 217
Joined: Mon Aug 29, 2005 1:23 am

Pietenpol Weight & Balance

Post by Kyle »

Good Evening Everyone,

I have a good friend who's father-in-law is nearing completion of a 40 - yup, 40 year quest to build a Pietenpol. He is in his 80's and to see his craftsmanship, and attention to detail is was really really amazing. When I spoke to him the other day he mentioned that it's almost ready for the trip to the airport and final assembly.

The conversation moved to weight & balance and the point that he does not have weight and balance data for the Pietenpol.
My question to all of you is - Have any of you owned one, or know of anybody that does? If so I would really like to be able to contact them for some guidance.

It has a Ford motor for power and I can get additional information as need... Hope everyone is well. Thanks allot :)
Kyle Takakjian
Truro, MA
52 C-170B, N8087A
User avatar
W.J.Langholz
Posts: 1068
Joined: Sat Jul 26, 2008 1:56 pm

Re: Pietenpol Weight & Balance

Post by W.J.Langholz »

Kyle
I thought the grand kids were still operating part of the bussiness in Cerry Grove aren't they? It's been some time since I have been there.

W.
ImageMay there always be and Angel flying with you.
Loyalty above all else except honor.
1942 Stearman 450
1946 Super Champ 7AC
User avatar
Brad Brady
Posts: 745
Joined: Fri Feb 29, 2008 2:54 am

Re: Pietenpol Weight & Balance

Post by Brad Brady »

Kyle,
Have your friends father-in-law call my good friend Paul Kruse 309-723-3901 He has been building a Pete for several years....many more than I have known him...be ready to talk....he is Irish like me, but I have never kissed the Blarney stone...apparently Paul HAS :lol: He will make your receiver ear hurt :lol: He is very knowledgeable...what he doesn't know off the top of his head, he will give you an on-line link to. He just sold his model A and is thinking to install a Corvair.....Like I said call him......Brad
User avatar
Kyle
Posts: 217
Joined: Mon Aug 29, 2005 1:23 am

Re: Pietenpol Weight & Balance

Post by Kyle »

OK - if they are it's a good bet they are on the internet and I'll have a look. Thank you...

Brad - thanks allot, I'll have Don give him a ring. Should be two peas in a pod - Don loves to talk as well - specially about airplanes :D
Kyle Takakjian
Truro, MA
52 C-170B, N8087A
User avatar
Bruce Fenstermacher
Posts: 10422
Joined: Tue Apr 23, 2002 11:24 am

Re: Pietenpol Weight & Balance

Post by Bruce Fenstermacher »

Kyle,

If you don't get the info you need the Golden Age Air Museum in Bethel, PA has a Pietenpol with a Ford motor. I'm sure my friend Paul Dougherty the owner operator would be willing to share the needed information. http://www.goldenageair.org/

BTW Paul let me fly the museums Pietenpol which was a thrill. Can't see much forward through or over the radiator and motor. This is not me flying in the picture at this link: http://www.goldenageair.org/collection/1932pp.htm
CAUTION - My forum posts may be worth what you paid for them!

Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
Post Reply
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.