Wing Ribs for 48 170
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
N4064V
- Posts: 39
- Joined: Wed May 22, 2002 4:26 am
Wing Ribs for 48 170
I'm looking for ribs for my 170 ragwing. Does anyone know where some might be located? Its for the right wing the 2nd through the 5th inboard from the wingtip. Thanks.
Mick Capouch
N4064V
N4064V
-
n2582d
- Posts: 3013
- Joined: Mon Apr 29, 2002 4:58 am
Re: Wing Ribs for 48 170
Mick,
I was surprised that Univair does not make these ribs. If I read your request correctly you are looking for the following ribs: #54 p/n 0522506, #50 0422212, #53 p/n 0522507, and #49 p/n 0422148. The 04... part numbers are also C-140 part numbers. p/n 0422212 is available from fromhttp://www.iwantcessnaparts.com/ for $81.36. They don't have any of the other ribs. You might try the Cessna 120-140 club for the 0422148 rib; specifically here: http://www.cessna120-140.org/forum/viewtopic.php?t=7283
I was surprised that Univair does not make these ribs. If I read your request correctly you are looking for the following ribs: #54 p/n 0522506, #50 0422212, #53 p/n 0522507, and #49 p/n 0422148. The 04... part numbers are also C-140 part numbers. p/n 0422212 is available from fromhttp://www.iwantcessnaparts.com/ for $81.36. They don't have any of the other ribs. You might try the Cessna 120-140 club for the 0422148 rib; specifically here: http://www.cessna120-140.org/forum/viewtopic.php?t=7283
You do not have the required permissions to view the files attached to this post.
Gary
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.