Aqua 2200 floats

[floatflyer]

I am looking at purchasing a set of aqua 2200 for my 180 horse 170. Has anyone flown a 180hp 170 or 172 on aqua 2200 and if so how did it perform? I am currently on edo 2000 but found a great deal on a set of aqua's and was considering giving it a try. I realize it will involve a field approval but was curious about performance. Any information would be appreciated.
Thanks

Mod Note; I deleted a nearly identical post by floatflyer in The Hanger in the interest of having only one thread on the subject.

[floatflyer]

I found a good deal on a set of aqua 2200 and am considering putting them on my 180hp 170b. I realize it will require a field approval but was curious if anyone has operated a 170 in this configuration and how it performed?

Also does anyone know the total weight of the edo 2000's with 170 rigging?

Thanks

Mod note: Combined this post with the first to for continuity.

[Blue4]

According to Cessna Drawing 0541125, the 170 float kit installation drawings for Edo 2000s, "Total weight of all wires, struts, fittings and floats 251#" See excerpt below.

Some folks may not care to hear about 170s on floats, but I'm very hopeful your project turns out well. I currently am running Edo 2000s and would love to (someday) upgrade.

-Scott

Edo 2000 Install Weight.jpg

[akgreg]

Those floats aren't by chance in the Fairbanks area? Good luck on the field approval.
I tried and was denied. STC or else misery.