Tail brackett needed
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
munro
- Posts: 5
- Joined: Sun Nov 23, 2003 6:52 pm
Tail brackett needed
I am looking for a source for a pma'd bracket. Part needed is aft most aluminum that holds horizontal in place with expensive nas bolts. Need to replace badly corroded part.
-
GAHorn
- Posts: 21303
- Joined: Fri Apr 12, 2002 8:45 pm
That may be one of the more complicated descriptions of a part I have ever heard.
Munro....how about looking in your IPC and telling us exactly which item, which figure, which page, and/or which part number you actually need?
(And I hope that if you're advertising "part wanted" for the mystery-part, you'll do so by sending your ad to webmaster@cessna170.org in accordance with forum rules.)
Munro....how about looking in your IPC and telling us exactly which item, which figure, which page, and/or which part number you actually need?
(And I hope that if you're advertising "part wanted" for the mystery-part, you'll do so by sending your ad to webmaster@cessna170.org in accordance with forum rules.)
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.