Cabin Dimensions

A place to relax and discuss flying topics.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
User avatar
170C
Posts: 3182
Joined: Tue May 06, 2003 11:59 am

Cabin Dimensions

Post by 170C »

I don't have my data here at the house & am needing to know a couple of dimensions.
1) Distance from the rear baggage bulkhead to the aft end of the tunnel.
2) Distance from the rear baggage bulkhead to the middle of the cabin door (about where the seat belt anchor is located).
If someone had this readily at hand I would appreciate it. :)
OLE POKEY
170C
Director:
2012-2018
User avatar
n2582d
Posts: 3013
Joined: Mon Apr 29, 2002 4:58 am

Re: Cabin Dimensions

Post by n2582d »

Dimensions.jpg
You do not have the required permissions to view the files attached to this post.
Gary
User avatar
GAHorn
Posts: 21294
Joined: Fri Apr 12, 2002 8:45 pm

Re: Cabin Dimensions

Post by GAHorn »

In the illustration provided by N2582D, subtracting sta 44 from sta 108 would give us 64". Actual measurement of my own airplane (53 B) the distance from bagg bulkhead to tunnel = 63" and to the seat belt attach bolt = 66". (Pretty close, heh?) :wink:
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons. ;)
User avatar
170C
Posts: 3182
Joined: Tue May 06, 2003 11:59 am

Re: Cabin Dimensions

Post by 170C »

Gary & George, thanks for taking time to respond to my request. That data is exactly what I need. :D
OLE POKEY
170C
Director:
2012-2018
Post Reply
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.